Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Lifecycle Controller 2 Release 1.4.0 User's Guide

PDF

Configuring RAID

If your system has one or more supported PERC RAID controllers with PERC 8 firmware or later, or SAS RAID controllers, use the RAID Configuration wizard to configure a virtual disk as the boot device.
  • NOTE: If there are any internal storage controller cards on the system, all other external cards cannot be configured. If there are no internal cards, then external cards can be configured.

To configure RAID:

  1. In the left pane, click Hardware Configuration.
  2. In the right pane, click Configuration Wizards.
  3. Under Storage Configuration Wizards, click RAID Configuration to launch the wizard. The View Current RAID Configuration and Select Controller page is displayed.
  4. Select the controller and click Next. The Select RAID Level page is displayed.
  5. Select the RAID level and click Next. The Select Physical Disks page is displayed.
  6. Select the physical disk's properties and click Next. The Virtual Disk Attributes page is displayed.
  7. Select the virtual disk parameters and click Next. The Summary page is displayed.
  8. To apply the RAID configuration, click Finish.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\